Sit-on sling to clean high-altitude glass

High-altitude glass cleaning sitting sling cleaning method: 1. High-altitude glass cleaning sling (above working rope, scientific name nylon rope, 18 mm in diameter, pulling force of 240,000 Newtons, about two and a half tons). 2. High-altitude glass cleaning hanging plate (made of ash wood). 3. High-altitude glass cleaning steel wire rope (10 mm in diameter). 4. High-altitude glass cleaning U-shaped crab buckle (steel). High-altitude glass cleaning exterior wall cleaning personnel must undergo professional training and be issued with a qualification certificate for exterior wall cleaning before they can work. Before going to work, you must carefully check the mechanical equipment, appliances, ropes, seat boards, locks, and safety belts for damage, and ensure that the mechanical performance is good and the various appliances are not abnormal before they can be operated. The operating rope and safety rope for high-altitude glass cleaning must be tied to two firm fixed points separately and tied with a dead knot. Soft objects should be added to the edge to prevent the rope from breaking due to wear. The lower end of the rope must be in contact with the ground. The rope man also needs to fasten a temporary safety rope. When cleaning high-altitude glass, the construction workers must wear overalls and helmets before taking their jobs. Before working, they must first wear safety belts, then safety locks (on the safety rope), and then fasten the seat plate shackles (on the operating rope). Only then can the hanging work be carried out. When the high-altitude glass is cleaned and lowered, the person in charge of construction shall give on-site command and the construction personnel shall help each other. Auxiliary appliances should be fastened tightly during high-altitude glass cleaning operations. In order to prevent falling and hurting people, it is strictly prohibited to laugh and play and carry other irrelevant items. During high-altitude glass cleaning, supervisors and construction personnel observe the tightness of operating ropes, safety ropes, twisted ropes, stringing and other phenomena at any time, and report problems in time and eliminate them in time. High-altitude glass cleaning upstairs guardians are not allowed to walk back and forth on the edge of the roof at will. When necessary, you must first tie your own safety rope, and then perform auxiliary work. Ground guardians are not allowed to read books and newspapers at the construction site, let alone watch other scenes at will. And it is necessary to prevent pedestrians from entering dangerous areas and pulling ropes and throwing ropes at any time. 10. When the operating ropes and safety ropes need to be moved, up and down, the guardian and auxiliary workers should coordinate and arrange them together, and tie the ropes tightly when not in use.